Page 2 of 2
#16 Re: Hornresp query - TL design Tool
Posted: Thu Mar 16, 2023 9:47 pm
by Scottmoose
Too long, too low tuned, not enough damping. Try for Fp = Fs/Qts' where Qts' = Qts including relevant compensation for amplifier output impedance or equivalent series R.
#17 Re: Hornresp query - TL design Tool
Posted: Mon Mar 20, 2023 5:33 pm
by vinylnvalves
Managed to get sometime to play with Hornresp at the weekend. A little better but still not what i was expecting to get. Doesnt seem to be any affect from changing the stuffing parameters - must still be doing something wrong.
- attempt2a.png (133.14 KiB) Viewed 2669 times
- attempt2b.png (160.2 KiB) Viewed 2669 times
Its along way off the original concept
- spiralhorn (2).png (80.35 KiB) Viewed 2669 times