Headphone amps to build or buy

For anything about cans, and the amplifiers that drive them
Ant
Shed dweller
Posts: 2332
Joined: Mon Jul 31, 2017 6:45 pm
Location: Yorkshire

#1 Headphone amps to build or buy

Post by Ant »

Ive kind of got into headphones recently. Circumstances mean i dont get to use the main system very much at all, and tidal on my phone and some nice headphones has been an enjoyable avenue.

The headphones i have available are as follows
B&w p5
B&w p7
Sennheiser momentum 1
Audio technica at706 electret which need a power amp to drive them
Sennheiser hdr180 wireless jobs.

Of these the p7 and the at ones are the best sounding, the p7s edging clear as the at electrets are sounding abit tired, and the at's dont block out extraneous noise half as well.
The p5s are the best at this but are not the best sounding.

The wired ones are all low impedance, all around 30r

Any thoughts from the panel?

Cheers ant
Also starring Rex Hamilton as Abraham Lincoln

www.bte-designs.weebly.com
User avatar
Mike H
Amstrad Tower of Power
Posts: 20157
Joined: Sat Oct 04, 2008 5:38 pm
Location: The Fens
Contact:

#2 Re: Headphone amps to build or buy

Post by Mike H »

Tubed or solid-state?

Ready-made or DIY?

Did a Google, there's loads. Some prices are barking (just IMO).

If DIY, lots of tube and SS kits on eBay (search 'headphone amplifier kit'). Most are cheap and might be fun to play around with.

:wink:
 
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
Ant
Shed dweller
Posts: 2332
Joined: Mon Jul 31, 2017 6:45 pm
Location: Yorkshire

#3 Re: Headphone amps to build or buy

Post by Ant »

I dont mind either way mike, buying is easier, building is more fun

I just dont know where to start
Also starring Rex Hamilton as Abraham Lincoln

www.bte-designs.weebly.com
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#4 Re: Headphone amps to build or buy

Post by ed »

if your looking for a bugdet solution you could do far worse than my latfet example. I've been happy with it for the last 2 years and although I winged about it being a tad bright, Rowuk was on the money suggesting different headphones have different presentations.

You could have had the spare boards if you were interested but I can only find 1 of the 5 I had, but I think 1 of my sons had a pair. If you're interested and he hasn't used them I'll get him to send them to you. For about £15 in parts plus a wall wart it's awesome value.
hpa se circuit.jpg
hpa se circuit.jpg (219.06 KiB) Viewed 8669 times
There's nowhere you can be that isn't where you're meant to be
Ant
Shed dweller
Posts: 2332
Joined: Mon Jul 31, 2017 6:45 pm
Location: Yorkshire

#5 Re: Headphone amps to build or buy

Post by Ant »

Yep id be interested in that ed, it'd be nice to do some soldering again
If he hasn't used them let me know
Cheers ant
Also starring Rex Hamilton as Abraham Lincoln

www.bte-designs.weebly.com
Ant
Shed dweller
Posts: 2332
Joined: Mon Jul 31, 2017 6:45 pm
Location: Yorkshire

#6 Re: Headphone amps to build or buy

Post by Ant »

Ed, dumb question, is it 12v dc or ac from a wall wart?
Also starring Rex Hamilton as Abraham Lincoln

www.bte-designs.weebly.com
User avatar
Nick
Site Admin
Posts: 15706
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#7 Re: Headphone amps to build or buy

Post by Nick »

it will be DC. 1 amp should be enough 350ma or so a side looks like from the CCS's
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
Ant
Shed dweller
Posts: 2332
Joined: Mon Jul 31, 2017 6:45 pm
Location: Yorkshire

#8 Re: Headphone amps to build or buy

Post by Ant »

Thought so. Yet another complete brain fart moment
Also starring Rex Hamilton as Abraham Lincoln

www.bte-designs.weebly.com
JamesD
Old Hand
Posts: 997
Joined: Tue Oct 09, 2007 4:26 pm
Location: North Yorkshire

#9 Re: Headphone amps to build or buy

Post by JamesD »

Just chiming in to say my P7s need 50mA for max drive and about 1-5 mA in practice to be loud!

Happy New Year!

James still lurking around :-)
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#10 Re: Headphone amps to build or buy

Post by IslandPink »

Happy New Year James !
"Once you find out ... the Circumstances ; then you can go out"
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#11 Re: Headphone amps to build or buy

Post by pre65 »

JamesD wrote: Sat Dec 31, 2022 5:27 pm
James still lurking around :-)
Glad to hear that James. :)
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#12 Re: Headphone amps to build or buy

Post by ed »

Hi Ant

I dug out the spice project, it shows 300 ma with 12v per channel. If you use the relay shown in the hand drawn circuit then whichever relay you use would need the solenoid current factoring in......it's all over thinking so I would just say use a 12v 2a smps.

The boards are en route apparently....It was my first attempt at a pcb so there are a couple of features, namely: I forgot the mounting holes and I got the wrong layer for the text so it's missing. I will send a a bom that matches the part values to the board positions. Bias the fet at about 265ma , about 1.25v across the the resistor at the bottom of the 317, shown as R4 on the spice diagram.
hpa spice.jpg
hpa spice.jpg (108.07 KiB) Viewed 8322 times
There's nowhere you can be that isn't where you're meant to be
User avatar
Nick
Site Admin
Posts: 15706
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#13 Re: Headphone amps to build or buy

Post by Nick »

My bad. The 350ma was because I saw R4 5ohm and then divided 1.25 by 4 instead of 5
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
Tony Moore
Old Hand
Posts: 495
Joined: Thu Aug 02, 2007 12:24 am
Location: New Brighton

#14 Re: Headphone amps to build or buy

Post by Tony Moore »

Hi Ant,

I have some pcbs left over from my DIY headphone build in 2021 which you can have free if you wanted to go the class-A PP route.

It's a design based on a circuit by Kevin Gilmore which I captured in KiCad and made my own layout.

Original site I used for reference:

http://www.pavouk.org/hw/dynalo/en_index.html

The only downside is it uses matched Toshiba 2SK170BL and 2SJ74BL JFETs for the input stage so a bit difficult to source these days. However, there is a seller in the US with genuine matched sets but at a bit of a cost. (punkydawgs on Ebay)

It's a fine sounding head amp though, absolutely quiet and very dynamic.

Image

There are things I probably would've done slightly differently in a mk2 version of the pcb but you live and learn! You're welcome to the KiCad files too if you wanted to make updates on the pcb.

Cheers,
Tony
User avatar
Nick
Site Admin
Posts: 15706
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#15 Re: Headphone amps to build or buy

Post by Nick »

Bias the fet at about 265ma , about 1.25v across the the resistor at the bottom of the 317, shown as R4 on the spice diagram.
Forgive my ignorance, but as the 317 is wired to be a CCS and its ref voltage is 1.25v how can you bias the fet for any more than that current and 1.25v across the sense resistor. I would expect the voltage at the source to just start to rise but no more current to pass. I would have thought you would bias the fet to put the CCS in limit and then enough extra to give you whatever headroom you need on the output.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
Post Reply