rms to dc converter

What people are working on at the moment
Post Reply
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#1 rms to dc converter

Post by ed »

wos occurin?

when I built the first sig gen back in 2013 I used AD536 to convert the raw ac out of the wien bridge to dc so that the atmel could read the voltage. The ad536 was about £11.

move on 9 years.....RS want £72 for the chip if I buy 25 of them...and there is a different package version for £40....

does anybody know of a RMS to DC converter about 20mv to 20v pk-pk that is not silly money?
There's nowhere you can be that isn't where you're meant to be
User avatar
Nick
Site Admin
Posts: 15707
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#2 Re: rms to dc converter

Post by Nick »

Well there is the LTC1966, but its only good to 1kHz, and its one of the many parts that you cant buy ATM.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
User avatar
Nick
Site Admin
Posts: 15707
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#3 Re: rms to dc converter

Post by Nick »

And without knowing what you mean by silly money, there is AD736 that RS seem to have for £20.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#4 Re: rms to dc converter

Post by ed »

thanks Nick..I was looking at the 736 yesterday and had pencilled it in as it was the only thing I could find

...but I was just sounding off about the enormous hike on the 536.

there had to be a slim chance there was something cheaper.....

Things here move at glacial speed and I've only just got around to revisiting the unfinished sig gen version 3 for which I had boards made 12 months ago. I've discovered that I completely forgot about the output voltage measurement so I'll have to break into the board to add the output of the 736 to the track for voltage measurement.....

silly money? do you have to ask? cheapskatesRus are now evencheaperskatesRus since my pension collapsed a bit back.

I was watching Steve's thread which got round to boutique caps and was amused to think of the difference between my JB caps in the triangle speakers to the Mundorfs. Mine are £2.10, the Mundorfs would be £21.00. I have to convince myself that I couldn't tell the difference....
There's nowhere you can be that isn't where you're meant to be
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#5 Re: rms to dc converter

Post by ed »

my apologies for wasting everybodies time.....

I've just found the BOM for signal generator version 3 dated 8.12.21.
It shows AD737..which are currently about £14.....

it would seem that 7 months ago I knew exactly what I was doing...and sometime between then and now I consigned all the info(including the whereabouts of the notes) to the metaphorical bin....
There's nowhere you can be that isn't where you're meant to be
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#6 Re: rms to dc converter

Post by simon »

Surely one of the best things about getting older is the opportunity to enjoy again something one's forgotten all about :-)
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#7 Re: rms to dc converter

Post by pre65 »

simon wrote: Wed Jul 06, 2022 6:37 pm Surely one of the best things about getting older is the opportunity to enjoy again something one's forgotten all about :-)
You might not think it's such a good thing when you get there Simon. :(
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
andrew Ivimey
Social Sevices have been notified
Posts: 8307
Joined: Mon Jun 11, 2007 8:33 am
Location: Bedford

#8 Re: rms to dc converter

Post by andrew Ivimey »

Trouble is.... you've forgotten what was you wanted to remember....
Philosophers have only interpreted the world - the point, however, is to change it. No it isn't ... maybe we should leave it alone for a while.
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#9 Re: rms to dc converter

Post by simon »

Already there Phil! No hope for me.
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#10 Re: rms to dc converter

Post by pre65 »

simon wrote: Wed Jul 06, 2022 7:48 pm Already there Phil! No hope for me.
:lol:
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#11 Re: rms to dc converter

Post by ed »

it gets worse.....

I built a new pc sometime back and omitted to copy the designspark stuff from the old machine.

I loaded the disc from the old machine and checked the designspark stuff and it all started to come back to me...

post #18 in this thread:
https://www.audio-talk.co.uk/phpBB3/vie ... 8&start=22

it seems I didn't send off the gerbers to pcbway, must have been distracted.

I was very nearly ready to redesign the whole thing. Oh waily waily

edit: only difference will be the TL082 will now be a TLE2072
There's nowhere you can be that isn't where you're meant to be
User avatar
Paul Barker
Social Sevices have been notified
Posts: 8870
Joined: Mon May 21, 2007 9:42 pm

#12 Re: rms to dc converter

Post by Paul Barker »

andrew Ivimey wrote: Wed Jul 06, 2022 7:43 pm Trouble is.... you've forgotten what was you wanted to remember....
I ordered some chemical off ebay for a purpose, I’ve forgotten. It stands on the shelf waiting for my brain to release the knowledge. 3 months and counting!
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#13 Re: rms to dc converter

Post by pre65 »

Paul Barker wrote: Thu Jul 07, 2022 11:00 am
andrew Ivimey wrote: Wed Jul 06, 2022 7:43 pm Trouble is.... you've forgotten what was you wanted to remember....
I ordered some chemical off ebay for a purpose, I’ve forgotten. It stands on the shelf waiting for my brain to release the knowledge. 3 months and counting!
What chemical was it ?

Perhaps we can help you remember. :)
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#14 Re: rms to dc converter

Post by ed »

AAAAaarrrrrggghhhhhh....

more digging and it seems there was a new design for sig gen, dated 1 day later than the one in the sig gen thread...09.12.21
sig gen4.jpg
sig gen4.jpg (190.14 KiB) Viewed 4072 times
it would seem that I replaced the JCE03 with TEC 3-2419 dc -dc isolator. I'm not sure why at this stage but I think I'd better go over the pcb design again before sending it off to pcbway.

If you can offer anything to this Nick I'd be grateful as I think it was you that recommended the isolator.....

I will pick this up again in the sig gen thread.
There's nowhere you can be that isn't where you're meant to be
User avatar
Nick
Site Admin
Posts: 15707
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#15 Re: rms to dc converter

Post by Nick »

I vaguely remember pointing to an isolated converter, but beyond that I am as in the clouds as you Ed :-)
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
Post Reply