Page 1 of 2

#1 Transcendent Sound Masterpiece.

Posted: Mon Jun 17, 2019 6:34 pm
by Cressy Snr
Putting this together for Nigel.
This is the third Transcendent product, I’ve built for him. Previous ones were:

Original 300B OTL with 25Hz AC heater supplies.
Minibeast SEOTL.

The Masterpiece is a three stage linestage/headphone amp using 2 stages of 12AU7 into 300B cathode follower output per channel. As with all Bruces products, it has a very low output impedance, made even lower with the use of feedback.

Image
Fingermarks will be cleaned off. :)

Image
Insides are about 3/4 done.

This unit has the $30 ALPS Blue pot upgrade offered on Bruce’s website.

#2 Re: Transcendent Sound Masterpiece.

Posted: Mon Jun 17, 2019 7:42 pm
by Ray P
The Masterpiece is the basis of the HPA I'm (very) slowly scratch building - it's a Masterpiece with a Soekris R2R DAC integrated into the chassis. One day I'll be able to use it via my mobile phone (lossless FLAC output via USB OTG connection) or by connection to the home network for streamed music.

I designed some PCBs for the Masterpiece amp sections and I have a pair of Andrews DHT filament supplies for the 300Bs. The rest I've still to work out.

http://www.audio-talk.co.uk/phpBB3/view ... =11&t=7124

Ray

#3 Re: Transcendent Sound Masterpiece.

Posted: Tue Jun 18, 2019 12:20 pm
by Cressy Snr
Ray P wrote: Mon Jun 17, 2019 7:42 pm The Masterpiece is the basis of the HPA I'm (very) slowly scratch building - it's a Masterpiece with a Soekris R2R DAC integrated into the chassis. One day I'll be able to use it via my mobile phone (lossless FLAC output via USB OTG connection) or by connection to the home network for streamed music.

I designed some PCBs for the Masterpiece amp sections and I have a pair of Andrews DHT filament supplies for the 300Bs. The rest I've still to work out.

http://www.audio-talk.co.uk/phpBB3/view ... =11&t=7124

Ray
Interesting :wink:

#4 Re: Transcendent Sound Masterpiece.

Posted: Tue Jun 18, 2019 12:23 pm
by Cressy Snr
The hard wired “Rozenblit neat” Masterpiece is all done and dusted, apart from taking off the fingerprints. :lol:

Image
Sounds excellent and adds a bit of dynamism and punch to the proceedings.
It was a little bit thin for my liking when it was first powered up, but the sound is warming through nicely as I write this.

#5 Re: Transcendent Sound Masterpiece.

Posted: Tue Jun 18, 2019 3:39 pm
by Wolfgang
The "thin" impression comes mainly from the NFB, the LM 317, and the CCS. Same thing with the 300B SE OTL.300Bs should sound fuller and warmer in the midrange. Less "glassiness" can be achieved by using star grounding with as short as possible wires replacing the "ground plate grounding" which is used in this preamp. At least to my ears it had this effect. The ground return path goes through the cheap solder terminal strips and screws to the amp housing. But with some room acoustics /speakers and OPT amps it might just sound right as it is. I don't think B. Rozenblit uses very linear HQ speakers and an acoustically treated room for fine tuning his amps.

#6 Re: Transcendent Sound Masterpiece.

Posted: Tue Jun 18, 2019 5:16 pm
by Cressy Snr
Aye, we’ve got ground buses, a star-point between the CCSs, mixed in with ground plane earthing in this preamp. It’s very, very quiet though. I have built it as standard because it’s not mine. Having listened to five and built three of his amplification products now, I think Bruce has a definite penchant for a preternatural clarity to the presentation; it seems to be his signature sound.

I’d reduce the feedback if it were mine, but as we know, from building OTLs and suchlike, these things ideally need to be adjusted individually, to suit your own particular system. That avenue is not an option in this case. However I’m sure Nigel will be well pleased with The Masterpiece as is. :)

#7 Re: Transcendent Sound Masterpiece.

Posted: Tue Jun 18, 2019 9:36 pm
by Ray P
Cressy Snr wrote: Tue Jun 18, 2019 12:23 pm The hard wired “Rozenblit neat” Masterpiece is all done...
Good to see you ate all your dinner too Steve.

#8 Re: Transcendent Sound Masterpiece.

Posted: Tue Jun 18, 2019 9:38 pm
by Ray P
Did you try listening with headphones?

#9 Re: Transcendent Sound Masterpiece.

Posted: Tue Jun 18, 2019 10:23 pm
by Cressy Snr
Ray P wrote: Tue Jun 18, 2019 9:36 pm
Cressy Snr wrote: Tue Jun 18, 2019 12:23 pm The hard wired “Rozenblit neat” Masterpiece is all done...
Good to see you ate all your dinner too Steve.
That’s my water bowl. :mrgreen:
Yes, I tried it with headphones and it’s really, very good. Excellent value for money.

#10 Re: Transcendent Sound Masterpiece.

Posted: Tue Jun 18, 2019 10:29 pm
by Ray P
Cressy Snr wrote: Tue Jun 18, 2019 10:23 pm Yes, I tried it with headphones and it’s really, very good. Excellent value for money.
Good to hear, that's my hope/expectation...

#11 Re: Transcendent Sound Masterpiece.

Posted: Wed Jun 19, 2019 9:00 am
by Ali Tait
Sounding any better with more listening Steve?

Might get one of these to go with the Pinnacles.

#12 Re: Transcendent Sound Masterpiece.

Posted: Wed Jun 19, 2019 11:29 am
by Cressy Snr
Yes, it warmed up quite nicely over the eight or so hours I soak tested it. The top end is delightful and the mids are more fleshed out now it’s been running a bit. It would IMO be well worth experimenting with different 300Bs to tune it to your own tastes.
Feeding a Transcendent sound power amp I reckon it will be the biz. Certainly worth the money.

#13 Re: Transcendent Sound Masterpiece.

Posted: Wed Jun 19, 2019 12:08 pm
by Ali Tait
Ok thanks Steve. Probably worth fiddling with feedback and a pair of Andrew’s supplies on the 300b’s too.

#14 Re: Transcendent Sound Masterpiece.

Posted: Thu Feb 02, 2023 8:25 am
by Abime75
Thnks ! :D :D

#15 Re: Transcendent Sound Masterpiece.

Posted: Thu Jan 25, 2024 10:59 pm
by Jwro
Hi, partially based on what I've read on this forum I am thinking of getting the Transcendent Sound Masterpiece kit and am wondering, now that it's been a few years, if your impressions have changed or if you are still happy with it? There were some comments about grounding issues, feedback, "thin" or "glassy" sounding but warming up nicely...? So, since I can't hear one, I'm trying to get a sense of what it really sounds like, or what the issues might be?
I'm newish to DIY so would probably build it stock first. Although, I found the modifications that some members did with the Masterpiece to be really intriguing !