The Nemesis 813 PP Amplifier

What people are working on at the moment
User avatar
IslandPink
Amstrad Tower of Power
Posts: 10041
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

#361 Re: The Nemesis 813 PP Amplifier

Post by IslandPink »

ed wrote: Tue Jun 30, 2020 1:53 pm it really should count, it's prompted by Susan Parker, her of Zeus fame.
Well of course you are right .. but I don't know Susan from Eve. I can go away and redress this, given a little time, though !
"Once you find out ... the Circumstances ; then you can go out"
User avatar
Paul Barker
Social Sevices have been notified
Posts: 8873
Joined: Mon May 21, 2007 9:42 pm

#362 Re: The Nemesis 813 PP Amplifier

Post by Paul Barker »

That brings the adapted halogen lighting smps. Unwind choke one turn to raise frequency further from 20khhz, alter output transformer (tiny toroid) Sq wv scope it for rms.
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
User avatar
Paul Barker
Social Sevices have been notified
Posts: 8873
Joined: Mon May 21, 2007 9:42 pm

#363 Re: The Nemesis 813 PP Amplifier

Post by Paul Barker »

Stephie says filament starvation is effective on 813....
"Two things are infinite, the universe and human stupidity, and I am not yet completely sure about the universe." – Albert Einstein
seaview
New User
Posts: 2
Joined: Wed Aug 03, 2022 11:08 am

#364 Re: The Nemesis 813 PP Amplifier

Post by seaview »

I am looking for 0-2.5-5-6.4v Paremeko filament transformer. Can I get your assistance?
seaview
New User
Posts: 2
Joined: Wed Aug 03, 2022 11:08 am

#365 Re: The Nemesis 813 PP Amplifier

Post by seaview »

IslandPink wrote: Tue Jun 30, 2020 4:52 pm James - can you think of any reason why I was able to get the Auroras dead quiet with AC fils on the 300B's, but Stephen couldn't get it anywhere good enough on the 813's ? There must be a few dB difference accounted for by the 10V vs. 5V , plus the Tannoy 15's vs. Ariels , but even so...
I think I used the Paremeko transformers which have 0 - 2.5 - 5 - 6.4v windings, hence a built-in centre tap.
Hi.I am looking for 0-2.5-5-6.4 Paremeko filament transformer. Can I get your assistance?
Kind regards
Post Reply