General 3 Legged Reg PCB (Possible Group Buy?)

What people are working on at the moment
Post Reply
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#1 General 3 Legged Reg PCB (Possible Group Buy?)

Post by Andrew »

I need to get a regulated power PCB done for a project I'm doing and so I have designed a general layout to support the common all garden 3 legged variable reg plus all its infrastructure including diodes, voltage set resistors, space for up to 3 smoothing caps, safety diode and so on.

I'd like to get these down to £3-£4 per PCB but it depends upon numbers, anyone interested? Trust me, they are dead handy, I reckon I could use a few without trying.

Please let me know.

Andrew
Attachments
reg_pcb.png
reg_schem.png
Last edited by Andrew on Fri Mar 27, 2015 11:35 pm, edited 1 time in total.
Analogue, the lost world that lies between 0 and 1.
User avatar
Ali Tait
Eternally single
Posts: 4373
Joined: Fri Jun 08, 2007 8:10 pm
Location: Galashiels

#2

Post by Ali Tait »

Count me in for four Andrew.
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#3

Post by simon »

Looks very interesting Andrew, at that price I could be up for quite a few for stock. I'll ask the dumb schmuck questions - what sort of current and voltage do you reckon they're good for?

I'm not at home at the moment so can't check but how do they compare with the heater type pcb you did a while back? My recollection is they were a bit more sophisticated?
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#4

Post by Andrew »

This is just a general LDO regulator's ecosystem for whenever you need a DC voltage, nothing remotely clever, just useful, job done. The idea is to take out some of the heavy lifting. It could power a DAC, run an op amp positive rail and so on. It is pretty much limited by the limits of the reg chip itself, providing you can get the heat away. I may toy with the idea of also supporting a diode bridge as well as the discrete diodes to get component price down for those who need the flexibility, you can put in less caps and use a cheap heatsink as other cost saving options; all depends on number of takers.

Andrew
Last edited by Andrew on Fri Mar 27, 2015 11:32 pm, edited 1 time in total.
Analogue, the lost world that lies between 0 and 1.
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#5

Post by Andrew »

Hi Simon, the two other designs were specifically aimed at heating valves, with their special requirements, especially DHT and high gain valves used in phono and preamps; this is much mote general purpose.
Analogue, the lost world that lies between 0 and 1.
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#6

Post by simon »

Thanks Andrew, I thought you might say something like that :-). I can use a couple at least on the arduino project I'm messing with at the moment, so if 3 or 4 quid is the final price put me down for 10. What sort of numbers are you looking at to get the pricing down?
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#7

Post by Andrew »

I'll get some numbers later today.
Analogue, the lost world that lies between 0 and 1.
SimonC
Old Hand
Posts: 545
Joined: Mon Sep 24, 2007 11:34 am
Location: West Yorkshire

#8

Post by SimonC »

Count me in for a few, I'll start at 6 and if the prices work out I may well take a few more.

Cheers
Simon C
Michael L
Old Hand
Posts: 653
Joined: Tue Feb 19, 2013 5:10 pm
Location: Shrewsbury

#9 Reg PCB

Post by Michael L »

I'd like four please Andrew.
Tony Moore
Old Hand
Posts: 495
Joined: Thu Aug 02, 2007 12:24 am
Location: New Brighton

#10

Post by Tony Moore »

Hi Andrew,

Count me in for 4 please.

Cheers,
Tony
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#11

Post by Andrew »

Tony M = 4
Ali T = 4
Simon = 10
Simon C = 6
Avinunca1 = 4
Andrew = 10

Total = 38

The PCB now supports a single large input cap (10,000uF) or 1, 2 or 3 slightly smaller diameter caps (5600uF) and either DO41 diodes (aka 1N400X types) or TO220 types for the soft recovery posh option. They are not mutually exclusive but more smaller parallel caps and fancier diodes would seem to go hand in hand; it does depend upon the application.

Current prices are roughly £200 for 50 so £4 each off (this assumes I get a prototype pair made fast-track in the UK first about and build up those in each of the two configurations to make sure there's no mistakes then order the final thing).

Size is a diminutive 80mm * 50mm * 1.6mm FR4 with 2oz copper and silk screen.

Andrew
Analogue, the lost world that lies between 0 and 1.
User avatar
Dave the bass
Amstrad Tower of Power
Posts: 12273
Joined: Tue May 22, 2007 4:36 pm
Location: NW Kent, Darn Sarf innit.

#12

Post by Dave the bass »

Image

Yes please thank you.

DTB
"The fat bourgeois and his doppelganger"
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#13

Post by Andrew »

Tony M = 4
Ali T = 4
Simon = 10
Simon C = 6
Avinunca1 = 4
Andrew = 10
DTB = Fore

Total = 42
Analogue, the lost world that lies between 0 and 1.
User avatar
thomas
Old Hand
Posts: 910
Joined: Sat Sep 26, 2009 1:52 am
Location: N.W.Kent

#14

Post by thomas »

Oh, just noticed this…

Yes please ,4, please.

Get me, pentodes and now this!!
Cressy Snr
Amstrad Tower of Power
Posts: 10552
Joined: Wed May 30, 2007 12:25 am
Location: South Yorks.

#15

Post by Cressy Snr »

I'll have 4 as well please Andrew.
Sgt. Baker started talkin’ with a Bullhorn in his hand.
Post Reply