Page 1 of 1

#1 DIY CD transports.

Posted: Mon Aug 29, 2011 1:23 pm
by pre65
In view of all the recent (very interesting) talk about DACs, I wondered if Clive had any tips on what feeds the DAC, ie the transport ?

For quite a while I've been championing the (rather old these days) NEC CDR-602 CD ROM reader, and more recently a computer DVD ROM drive in a small form case with Chinese controller and display kit, shown here without outer casing.Last mod was to remove the computer PSU and install a 12v/5v SMPSU.

Image

#2 Re: DIY CD transports.

Posted: Mon Aug 29, 2011 2:08 pm
by JackOfAll
deleted

#3

Posted: Wed Nov 16, 2011 7:55 pm
by pre65
For the last few months I've been using my Cambridge Audio CD player with the DAC. Tonight I've gone back to the DIY CD player and I could tell within seconds that it was better.

So I'm bringing it to Owston this weekend. :wink:

Here it is "clothed".

Image

#4

Posted: Wed Nov 16, 2011 10:08 pm
by Mike H
This is the one with the puck?

Looks OK from here! :D

#5

Posted: Wed Nov 16, 2011 10:14 pm
by pre65
Mike H wrote:This is the one with the puck?
NO !

This is the one with a computer DVD drive, I don't think you have seen it before.

#6

Posted: Thu Nov 17, 2011 3:57 pm
by Mike H
Ah!!

#7

Posted: Sun Aug 10, 2014 9:55 pm
by pre65
I've ordered a PS1 Sony console (model SCPH-1002 ) off Ebay, and I've found out how to extract the SPDIF signal.

Cost me £15 so nothing to lose, and I always wanted a top loader.

Will not be here for about 7 days so no more news for a while. :wink:

#8

Posted: Mon Aug 11, 2014 11:45 am
by Mike H
Blimey talk about raised from the dead...

LOL .. :lol: