Page 1 of 7
#1 ebay DAC
Posted: Sat Jul 23, 2011 2:32 pm
by david C
don't know why but for some reason I've just bought one of these,
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWNX:IT
has anyone got one of them what did you use for a PS?
#2
Posted: Sat Jul 23, 2011 2:45 pm
by al newall
That's the one we've been discussing in the Beginners section.
Three of us have them i think.
The power supply is onboard, so you just need to connect one or two 12-15v
transformers to the board.
I use a 12-0-12v 30Va, and a 12v with twin secondaries.
There's at least a couple of threads over on DIYaudio, which deal with modding them.
I've just started changing things on mine.
#3
Posted: Sat Jul 23, 2011 3:07 pm
by pre65
Hi David.
I use an 15-0-15 and a 0-12v (0-6 + 0-6 in series) on mine.
The 15-0-15 was more like 17-0-17 so I had to resistor it down to 15-0-15 as the regulator chips were getting a bit hot.
Not sure what the VA ratings are as they were unmarked, but they get a bit warm.
#4
Posted: Sat Jul 23, 2011 3:27 pm
by david C
thanks Al and Philip
where did you get your tx from, my brain hurts trying to find one
they suggest this one from them
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT
I can't believe how much I've forgotten
#5
Posted: Sat Jul 23, 2011 3:36 pm
by pre65
Both mine were in my spares box.
If I were starting from scratch I'd probably go with the one you linked to.
Two toroids from RS / Rapid / Farnell etc would be an alternative but take up more space.
#6
Posted: Sat Jul 23, 2011 3:40 pm
by david C
thanks Philip
I think I might do that,
funny the listing says 220v but the tx in the picture says 230v
#7
Posted: Sat Jul 23, 2011 3:44 pm
by pre65
david C wrote:
funny the listing says 220v but the tx in the picture says 230v
I have a similar transformer (looks the same but different voltages) for my TDA1541 DAC valve output stage and that has two 115v primaries.
#8
Posted: Sat Jul 23, 2011 3:55 pm
by JackOfAll
deleted
#9
Posted: Sat Jul 23, 2011 4:23 pm
by david C
thanks,
I bid the original one $20.00 so got it for £12
#10
Posted: Sat Jul 30, 2011 12:14 pm
by david C
just got the board, am I right in saying that the power terminals are 15-0-15
from the left?
#11
Posted: Sat Jul 30, 2011 12:42 pm
by pre65
The 3 way connector (in front of the middle large capacitor) is 15 - 0 - 15.
The 2 way next to it is 0 - 9 or 0 - 12
#12
Posted: Sat Jul 30, 2011 12:46 pm
by david C
thanks Philip,
that's what I thought but wasn't quite sure
#13
Posted: Sat Oct 01, 2011 7:00 pm
by Puffin
What do these sound like?
#14
Posted: Sat Oct 01, 2011 7:45 pm
by Nick
Standard, Good. With better op amps, very good. With valve output stage good as I have heard.
#15
Posted: Sat Oct 01, 2011 9:02 pm
by Puffin
Nick wrote:Standard, Good. With better op amps, very good. With valve output stage good as I have heard.
Did any of you get involved with the "Cheapo Chinese Dac" malarkey a few years ago? Just wondered if these were any better.
Not allowed to post the link yet.