A friend of a friend has just set up this company, looks like it could be a useful place to know about:
http://www.shapemonkey.com/
Simon C
Laser cutting for Hobbyists
- shane
- Social outcast
- Posts: 3405
- Joined: Sun Sep 16, 2007 12:09 pm
- Location: Kept in a cool dry place.
#2
Looks like a really useful service. Wish your mate every success. I can see rows of gleaming amplifier top and front plates.
Long-term, how about investing in a water-jet cutter for all those slate and stainless lovers out there?
Now then, who was it that made a perspex pick-up arm....
Long-term, how about investing in a water-jet cutter for all those slate and stainless lovers out there?
Now then, who was it that made a perspex pick-up arm....
#4
If it's anything like my friend's laser cutter, it won't cut metals, but only etch them with the use of an expensive paste. It is limited to cutting plastics, card, wood, leather, paper, cork, some rubbers depending on colour. It will etch metal and glass too. His only takes 18" square pieces of work - quite small.
It's quite handy for making mock ups of amp top plates before you send them to the manufacturers though.
It's quite handy for making mock ups of amp top plates before you send them to the manufacturers though.
©2020 Lee
#5
Got some answers back from Dave about colours, sizes, metals etc:
Others colours can be offered. We wanted to start with a limited selection and build up after gauging demand but there is a massive selection including smoked, tinted, opal effect, etc in red, blue, green, yellow, ... The image in the "start uploading" area gives a small idea of colours available. If you have something in mind then drop me a line. Depending on what colour you want, there may be a few extra days lead time as they will not necessarily be in stock.
The max size I can offer is approx 400x250mm. If you do want larger sizes that may limit the colour availability but again, if you have something in particular in mind I'll give you a more concrete answer at the time.
The web site won't be offering metals anytime soon. I may be able to farm something out on your behalf though.
Thanks again for the ideas and support. I hope this has answered your questions.
Please keep in touch and I hope to see some orders soon!
Cheers,
Dave
Dr David Taylor
ShapeMonkey.com
Others colours can be offered. We wanted to start with a limited selection and build up after gauging demand but there is a massive selection including smoked, tinted, opal effect, etc in red, blue, green, yellow, ... The image in the "start uploading" area gives a small idea of colours available. If you have something in mind then drop me a line. Depending on what colour you want, there may be a few extra days lead time as they will not necessarily be in stock.
The max size I can offer is approx 400x250mm. If you do want larger sizes that may limit the colour availability but again, if you have something in particular in mind I'll give you a more concrete answer at the time.
The web site won't be offering metals anytime soon. I may be able to farm something out on your behalf though.
Thanks again for the ideas and support. I hope this has answered your questions.
Please keep in touch and I hope to see some orders soon!
Cheers,
Dave
Dr David Taylor
ShapeMonkey.com