Hi-i have fired her up and i seem to have a right channel problem cos the image is to the left (swapped speaker leads and sound goes to the right.),so it is now waiting for the caps to discharge so i can have a look for the problem.
Initial impression is not good ! It seems to have lost its sparkle !!
I will see if i can find the prob and give it another go.
http://i111.photobucket.com/albums/n146 ... 32ACCS.jpg
http://i111.photobucket.com/albums/n146 ... CCS001.jpg
CCS rules supreme!
-
pre65
- Amstrad Tower of Power
- Posts: 21400
- Joined: Wed Aug 22, 2007 11:13 pm
- Location: North Essex/Suffolk border.
#32
Hi-found the problem !
When i measured across my resistor combination i got 100R So i remade the joint between the two 10R resistors and BINGO,we got the proper 16.6R.
So the RH channel was only drawing 12.5 ma,no wonder it was lop sided.
Now it seems like its old self-but with more bass.
Now i suspect Andrew might say the bass was enough before,but its not just louder,there is just a bit more of it.
For the time being the mods will stay,and i will see how it sounds with the Adires and KLS3.
When i measured across my resistor combination i got 100R So i remade the joint between the two 10R resistors and BINGO,we got the proper 16.6R.
So the RH channel was only drawing 12.5 ma,no wonder it was lop sided.
Now it seems like its old self-but with more bass.
Now i suspect Andrew might say the bass was enough before,but its not just louder,there is just a bit more of it.
For the time being the mods will stay,and i will see how it sounds with the Adires and KLS3.
The only thing necessary for the triumph of evil is for good men to do nothing.
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)
Edmund Burke
G-Popz THE easy listening connoisseur. (Philip)