Ultimate Ears...

For anything about cans, and the amplifiers that drive them
Post Reply
JamesD
Old Hand
Posts: 997
Joined: Tue Oct 09, 2007 4:26 pm
Location: North Yorkshire

#1 Ultimate Ears...

Post by JamesD »

Just had to splash out on new phones. I need them for audio assessment at work and the bottom end was very important as we have had some issues with sub 100Hz noises. They had to be completely sound isolating both ways...

Of course I need them for listening and relaxing when away staying in a hotel which is 4 days a week for me on average.

As it was work related I managed to try quite a few pairs aand I decided on the Ultimate Ears Super.Fi 5 EB. A ridiculous name for a rather good pair of phones. They are inner ear phones so not for everybody. The EB stands for extended bass and they hvae more sense of bass weight than most phones I tried.

On the road I use an EMU 0202 USB DAC to drive them.. I guess I need to build something smaller than Nicks 211 headphone amp :D Although I still have four 833 in the cupboard...

James
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#2

Post by Andrew »

Hi James,

Good to hear from you...

211 Headphone amp is a bit hard to take with you when travelling ;)

What about something smaller?

I've finally cottoned to what you were saying about the darn clever Russian chaps, they really have some hidden treasures out there.

You wouldn't believe the fun I've been having with the 6C45 and a few programmable shunts.

And look at the curves on this chappie.
Attachments
triode.jpg
JamesD
Old Hand
Posts: 997
Joined: Tue Oct 09, 2007 4:26 pm
Location: North Yorkshire

#3

Post by JamesD »

Wow!!!

Nice straight curves and evenly spaced. There is a lot to be said for the 6C45 - it even works at very low voltage like 25 V on the anode...

I'm thinking a nice little travelling amp is on the cards - weight is the big problem so maybe it time to go OTL...

James
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#4

Post by Andrew »

Ah but that's not a 6C45....... ;) Tho' I admit it could be....looking at the lines.

Onto the 6C45, its running about 215V @ 45 mA and that little valve makes a cracking spud amp.
Last edited by Andrew on Sun Feb 01, 2009 3:56 pm, edited 1 time in total.
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#5

Post by pre65 »

Andrew wrote:Ah but that's not a 6C45....... ;) Tho' I admit it could be....looking at the lines.
.
I suppose someone had to ask !

What valve is it then ?
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
Will
Old Hand
Posts: 497
Joined: Mon Jun 11, 2007 10:35 pm
Location: Northumberland

#6

Post by Will »

Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#7

Post by Andrew »

Its a tetrode, triode connected, 6E5P.

-- Andrew
JamesD
Old Hand
Posts: 997
Joined: Tue Oct 09, 2007 4:26 pm
Location: North Yorkshire

#8

Post by JamesD »

Ahh, that makes sense now. I was trying to work out the gm but not knowing the grid voltage spacing made it a guess...

I haven't used this one but it has a great reputation as a gutsy driver - used by no less the Romy the Cat...

It would make a great headphone amp too...

I'm still thinking OTL, so maybe differential CF with dc servos... The phones are 21ohms impedance so driving them from a similar value would work or even higher as the power loss means nothing they are so sensitive...

James
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#9

Post by Andrew »

Yes, the gm is about 30, mu 30-35 so should make a reasonable cathode follower.

I was thinking of trying it is the second stage of a tx-coupled Akido as the gain isn't quite enough for a 300B on its own, unless you run it as a tetrode. However, the tetrode curves had a bit of a slope on them so I suspect its a better triode than a tetrode.

http://www.tubecad.com/2006/08/blog0074.htm - 4th diagram from the top, using a pentode for gain.

cheers,

-- Andrew
JamesD
Old Hand
Posts: 997
Joined: Tue Oct 09, 2007 4:26 pm
Location: North Yorkshire

#10

Post by JamesD »

Yes its neat, inplace of the 12B4? that would make a great driver for 300B

and a nice little power amp in its own right :D

I'm chewing over options for the headphone amp... I might even go with FETs this time and make it wallwart powered...

James
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#11

Post by ed »

this promises to be the biz....

need more than a walwart though

http://www.diyaudio.com/forums/attachme ... 1192313549
There's nowhere you can be that isn't where you're meant to be
Andrew
Eternally single
Posts: 4206
Joined: Thu May 24, 2007 2:18 pm

#12

Post by Andrew »

JamesD wrote:Yes its neat, inplace of the 12B4? that would make a great driver for 300B
Yes, for the pentode gain stage of th Aikido I intend to work my way through the list on P Millet's pentode pages.

and a nice little power amp in its own right :D
Yes, I suppose it would...

I'm chewing over options for the headphone amp... I might even go with FETs this time and make it wallwart powered...

James
Be interested in that, could be a nice little item for the office.

-- Andrew
JamesD
Old Hand
Posts: 997
Joined: Tue Oct 09, 2007 4:26 pm
Location: North Yorkshire

#13

Post by JamesD »

I like the First Watt amps. but their a bit over the top for headphones that are 120 dB/W sensitive!

For the office, hotel and car if I can get it to work :)

James
richardcooper2k
Old Hand
Posts: 780
Joined: Thu Jun 07, 2007 2:32 pm
Location: sheffield

#14

Post by richardcooper2k »

i think you brought that emu thing to one of the fests didn't you james ?

if i've got it right there is a school selling 21 of them off on ebay

here's one :

http://cgi.ebay.co.uk/Emu-0202-USB-Audi ... 240%3A1318

i'm tempted.....

new prices seem to have dropped too :

http://www.imusician.co.uk/acatalog/inf ... m=00057336
JamesD
Old Hand
Posts: 997
Joined: Tue Oct 09, 2007 4:26 pm
Location: North Yorkshire

#15

Post by JamesD »

Hello Richard,

Yes, thats the beastie I used at the fest. Its an excellent little box and better than many commercial DACs. It is also fully recognised by the latest version of Ubuntu and drivers can be hacked to work with any of the linux flavours (OSS drivers).

The class A op amp outputs drive headphones very well.

At £64 it is a bargin and you can record through it too...

I guess I should go through my media pc setup - full multi-channel PVR, Internet streaming and capture, music library and all that tosh plus proper audio quality playback... I do it in the computer audio section though.


James
Post Reply