Valve Headphone Amp

We all start somewhere
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#31 Re: Valve Headphone Amp

Post by simon »

I changed my mind again and used on-board sinks by dropping the relays. Gerbers uploaded, just the wait now.
.
Final.png
Final.png (56.38 KiB) Viewed 8446 times
.
Eds buffer rev 4 stereo no relays.png
Eds buffer rev 4 stereo no relays.png (114.83 KiB) Viewed 8446 times
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#32 Re: Valve Headphone Amp

Post by simon »

Well it works! Absolutely quiet too. With Sennheiser 650s there's more than enough volume so I don't need any gain.
20230903_190958.jpg
20230903_190958.jpg (237.91 KiB) Viewed 7536 times
.
I'm using it with one of Andrew's general 3 leg reg PCBs, so just a simple LM317 series reg to get me +12V. I wonder if a nice shunt reg might be beneficial here? Any suggestions/thoughts?

I'm wondering about a Jung/Didden superreg which seems highly regarded, but it uses D44H11 transistors which are out of stock at all the usual suspects and it will be a long time before they have any more. Bum.
https://linearaudio.nl/superregs
Tony Moore
Old Hand
Posts: 495
Joined: Thu Aug 02, 2007 12:24 am
Location: New Brighton

#33 Re: Valve Headphone Amp

Post by Tony Moore »

I just built the super reg and I got the transistors on Ebay from a guy in the UK. They seem fine. The regulator works a treat.
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#34 Re: Valve Headphone Amp

Post by simon »

Thanks for the feedback Tony. I've been working my way through the monster thread on DIYAudio for some light relief - like many monster threads there there's a lot of noise between the nuggets. But I've found alternative recommendations for a number of the more tricky parts so may well give it a go.
Tony Moore
Old Hand
Posts: 495
Joined: Thu Aug 02, 2007 12:24 am
Location: New Brighton

#35 Re: Valve Headphone Amp

Post by Tony Moore »

I've PM'ed you the Ebay suppliers I used for the hard to find transistors and the AD825s/
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#36 Re: Valve Headphone Amp

Post by simon »

Thanks Tony :thumbright:
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#37 Re: Valve Headphone Amp

Post by simon »

The SuperReg made a huge difference, it transformed the sound. I've slowly boxed it up, in a similar style to the DAC I boxed recently.
.
20231126_181715.jpg
20231126_181715.jpg (200.57 KiB) Viewed 4802 times
.
20231126_183211.jpg
20231126_183211.jpg (215.55 KiB) Viewed 4801 times
.
Interestingly though when I put the lid on humming becomes audible and there are vibrations though the chassis. With the lid off there is very quiet humming that can only be heard from say 200mm away. There is no vibration that I can detect touching the trafo lams.

With the lid on it's like a vibrating machine!

It's a steel Hammond chassis. The main box is grounded to PE, the lid isn't really bonded to the box. As the lid gets close to the box, say 5mm, the humming/vibration starts. I'm guessing it's some kind of magnetic field effect?

Might proper bonding of the lid help? Any thoughts or suggestions?
User avatar
Nick
Site Admin
Posts: 15707
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#38 Re: Valve Headphone Amp

Post by Nick »

Is it mechanical hum or through the headphones?
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#39 Re: Valve Headphone Amp

Post by simon »

Mechanical, there's nothing I could detect through headphones
User avatar
Nick
Site Admin
Posts: 15707
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#40 Re: Valve Headphone Amp

Post by Nick »

Stick some damping on the lid then would be my thought. May be the field from the tx moving the lid.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
simon
Thermionic Monk Status
Posts: 5600
Joined: Thu May 24, 2007 11:22 am
Location: People's Republic of South Yorkshire

#41 Re: Valve Headphone Amp

Post by simon »

Yep that's worth a try.

I can't help thinking though that there's something going on that's not good - very modest vibration increases significantly with the lid in place. The trafo does not seem happy.
Post Reply