Cambridge CXC laser assy.

Dedicated to the silver disk spinner
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#1 Cambridge CXC laser assy.

Post by pre65 »

"The Cambridge CXC transport seems good value, but mine has developed a fault, and after it has warmed up it skips a bit. :("

I've decided to do something about this.

By reading up I found the CXC has a Sanyo laser assy. I've removed the one fitted and the pictures tie up with the suggested replacement. £12.28 all in.

Should be here wk 2 2023, I just hope I can remember how it all fits together. :wink:

As an aside, the toroid Cambridge use is a secondary 10v @ 2A so I will leave that alone for the time being.
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
Chow
New User
Posts: 2
Joined: Mon Dec 19, 2022 6:03 am

#2 Re: Cambridge CXC laser assy.

Post by Chow »

Hello,

Where did you find the replacement ? I'm interested too, as I've had this problem for a while.
My website on this page : https://www.mypornmotion.com/
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#3 Re: Cambridge CXC laser assy.

Post by pre65 »

Chow wrote: Tue Dec 20, 2022 7:08 am Hello,

Where did you find the replacement ? I'm interested too, as I've had this problem for a while.
Well, this is the info I got, but best check to see if yours is the same.

"The drive itself is covered in Cambridge labelling, but it’s a common Sanyo SFP101N, 16-pin. "

All the Ebay ones seem to come from China, as is the one I ordered from Amazon. I'm told it is now in transit, or was it a sprinter ? :lol:
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#4 Re: Cambridge CXC laser assy.

Post by pre65 »

The replacement laser unit has just been delivered, not in transit, but Volvo estate. :wink:

I've unpacked the unit and it looks the same, but won't attempt any actual replacement work today, except for changing over the four rubber isolators.
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#5 Re: Cambridge CXC laser assy.

Post by pre65 »

Well, I put it all back together, but the display reads "no disc".

Ho-hum, further investigations required. :(
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
Nick
Site Admin
Posts: 15707
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#6 Re: Cambridge CXC laser assy.

Post by Nick »

I don't know that head, but check there is no shorted blob of solder that's designed to be removed after installation.

https://universaldiscoverymethodology.c ... revisited/

https://www.antiqueradios.com/forums/vi ... 3&t=329233
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#7 Re: Cambridge CXC laser assy.

Post by pre65 »

Nick wrote: Tue Jan 03, 2023 6:54 pm I don't know that head, but check there is no shorted blob of solder that's designed to be removed after installation.

https://universaldiscoverymethodology.c ... revisited/

https://www.antiqueradios.com/forums/vi ... 3&t=329233
Thanks Nick, I found the "blob", but being heavy handed with small side cutters I've fuc*ed up the small pcb.

Another order to China. :(
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
Nick
Site Admin
Posts: 15707
Joined: Sun May 06, 2007 10:20 am
Location: West Yorkshire

#8 Re: Cambridge CXC laser assy.

Post by Nick »

What the hell were you using the cutters for? Just use a iron, and if needed some solder wick, but just the iron, if its free of solder will normally take it away.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#9 Re: Cambridge CXC laser assy.

Post by pre65 »

Nick wrote: Tue Jan 03, 2023 9:13 pm What the hell were you using the cutters for? Just use a iron, and if needed some solder wick, but just the iron, if its free of solder will normally take it away.
It's the gorilla in me. :(
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#10 Re: Cambridge CXC laser assy.

Post by pre65 »

I have ordered another unit, probably another few weeks as China seems the only source of such items.
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#11 Re: Cambridge CXC laser assy.

Post by pre65 »

I've received another laser unit from China.

I won't have time today, but possibly tomorrow.
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
Greg
Social outcast
Posts: 3198
Joined: Wed May 23, 2007 11:14 am
Location: Bristol, UK

#12 Re: Cambridge CXC laser assy.

Post by Greg »

First, put your Gorilla away!
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#13 Re: Cambridge CXC laser assy.

Post by pre65 »

Greg wrote: Tue Jan 17, 2023 5:25 pm First, put your Gorilla away!
:lol:

As a bonus, I've found some copper solder wick.
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
User avatar
Mike H
Amstrad Tower of Power
Posts: 20157
Joined: Sat Oct 04, 2008 5:38 pm
Location: The Fens
Contact:

#14 Re: Cambridge CXC laser assy.

Post by Mike H »

AA-AND??? Image
 
"No matter how fast light travels it finds that the darkness has always got there first, and is waiting for it."
User avatar
pre65
Amstrad Tower of Power
Posts: 21373
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex/Suffolk border.

#15 Re: Cambridge CXC laser assy.

Post by pre65 »

Mike H wrote: Tue Jan 17, 2023 6:14 pm AA-AND??? Image
Nothing yet, just got home from the Indian restaurant.

Toilet roll is in the fridge. :lol:
The only thing necessary for the triumph of evil is for good men to do nothing.

Edmund Burke

G-Popz THE easy listening connoisseur. (Philip)
Post Reply